Led Strip Running Water Light 120led/M SMD2835
1. LED type: SMD 2835 belt control IC WS2811
2. PCB color: white PCB
3. The number of leds: 60 leds / 108 leds / 126 leds/m
4. Length: 5 m/10m/15m/20m
5. Power: 24 w/m (120 leds/m)
Konnine offer the single color running water light.
Red: 12V positive pole (VCC)
White :12V negative (GND)
Green: signal line (DATA) the two extra lines are backup power lines, red :12V positive pole/white :12V negative pole
Waterproof grade: IP20 bare board: the lamp beads exposed outside are not waterproof (there is double-sided tape on the back);
IP65 glue drop: the lamp bead is covered with high transparent resin to prevent a small amount of water splash (double-sided glue on the back)
IP67 casing: use silicone casing with good light transmission and outdoor rain protection (non-double-sided adhesive on the back) packaging: anti-static bag, naked version, double-sided adhesive on the back of drip adhesive, non-double-sided adhesive on the casing;
Main features:
An IC chip controls an LED bead to form a loop. The controller controls the circuit above the FPCB circuit board through the IC chip to achieve different LED effects: chase, running, running, discoloration, breathing, flash, clockwise running, counterclockwise running, simulating lightning, etc. Cutting and welding are convenient and free: each LED can be formed into a loop, which can be cut off and welded to meet the customer’s requirements of various length of lamp strip
Control Description
Running Water Control：
Flow control, running after the constant light bar
Backflow Control：
Reflux controller, switch on the signal after the light strip running constant, disconnect the trigger after the light strip flowing back, the effect is more cool.
